PH-001 Armcable

$ 15,999

The highest quality construction throughout
When using an MM or MC cartridge, the cold side of the phono cable serves only as a ground. In the case of optical cartridges however the cold side is used to supply power from the equalizer to the cartridge. Therefore, in such an application, the cold side of the cable is just as important as the signal carrying hot line. The PH-001 features identical materials and construction on both the hot and cold sides ensuring that the power supply is kept stable.

Complete Shielding
Optical cartridges have a relatively high impedance due in part to the photo sensors used in their design. Due to this high impedance, external noise may be picked up if an unshielded phono cable was used. The DS Audio PH-001 is completely shielded with a silver plated copper braid, thus completely illuminating any potential interference.

RCA terminals machined from pure copper
The PH-001 features RCA phono connectors machined from pure copper. The pure copper base conductor is then gold plated. Use of such high quality connectors allows even more musical detail and texture to shine through, along with a heightened sense of openness.
Silver-plated copper conductors
The PH-001 cable features silver plated pure copper conductors, each conductor is made up of 37 strands of 0.26mm diameter wire. This gives a very large overall conductor cross-sectional area of 1.964m㎡ .

PH-001 Phono cable
RCA terminals pure copper terminals
RCA terminal body Aluminum
Cable outer diameter 15mmφ
Cable material Silver plated copper wire
Composition φ0.26mm/37 wires
Conductor cross-sectional area 1.964㎟
Insulator material FEP (fluoroplastic)
Shield Mesh shield
Shield material Silver plated copper wire
Length 1.2m

DIN(Straight) to RCA or DIN(L-type plug) or RCA to RCA selectable
※Can be used with MM/MC cartridges without any problem.