Even with all this innovation on show, the ZEN Blue 3 has even more tricks up its sleeve.

Leveraging the capabilities of the Qualcomm QCC518x chipset paired with a dedicated ESS Sabre DAC and Hi-Fi circuitry, it outperforms most Bluetooth transmitters and receivers.

The ZEN Blue 3 is also able to function as a fully wired DAC, offering 96kHz/24Bit audio via USB-C, or 192kHz/24Bit audio via SPDIF, which can be output via 4.4 balanced or RCA analogue outputs.

The ZEN CAN 3 now supports IEMs using xMEMS, an innovative micro-speaker technology pushing the boundaries of headphone performance.

Ultra-fast mechanical response, 150 times faster than a typical dynamic driver
Flat 2° phase response for more accurate sound reproduction
+/- 1° phase matching for more accurate spatial sound
Silicon speaker diaphragm, 95 times more rigid than plastic, for reduced speaker break-up and a less muddy midrange
By incorporating the pioneering xMEMS amplification first found in the flagship iDSD Diablo-X, the ZEN CAN 3 can deliver the voltage required for optimal operation of this cutting-edge technology, bringing the power of xMEMS to a whole new audience and ensuring that you are ready for the future as it happens.

• Supports four MC/MM gain selections from 36dB to 72dB and four input impedance settings, ensuring compatibility with a wide range of cartridges

• Features an intelligent subsonic filter to effectively remove only the ultra-low frequencies caused by warps, not by the music, unlike typical bass-reducing filters

• With an EIN (Equivalent Input Noise) of -151dBV, this phono stage surpasses some Class A+ models by 20dBV,ensuring a super-silent noise oor

• Precise RIAA with balanced output, performance matches that of a $1,000 phono stage

• Internal high-tech 1.2MHz clean power supply, rivalling classic tube amplifiers' LC filtering circuits

• Supports all high-res music formats up to PCM 768kHz, DSD512, and MQA

• Equipped with a USB-C input for plug-and-play connectivity

• Offers both 6.3mm Single - Ended and 4.4mm Balanced headphone outputs, delivering up to 390mW of power for various headphones and earphones

• Features RCA and 4.4mm balanced outputs with variable and fixed volume settings, allowing for seamless connection to your active speakers, preamplifiers, or power amplifiers

• Includes XBass+ to restore lost bass frequencies from open headphones

• Comes with PowerMatch, a switchable gain to ensure optimal power for the headphones you are using

• Improved low-jitter GMT (Global Master Timing) clock provides >20dB better performance

• Improved circuitry, including enhanced DC offset, ensures heightened signal purity and accuracy

• Incorporates a 16-Core XMOS low-latency microcontroller for DSD512 and MQA full decoding

The ZEN DAC Signature V2 and ZEN CAN Signature HFM with 4.4mm Balanced cable make a tasty treat for your desktop.

The ‘ZEN Signature Set HFM’ comprises both the ZEN DAC Signature V2, the upgraded version of our original ZEN DAC Signature, and the new ZEN CAN Signature HFM.

The ZEN CAN Signature HFM has an unique EQ curve that brings out the best in the already outstanding HIFIMAN range of headphones.

This set includes a high-performance 4.4mm Balanced cable to connect them together.

The ZEN CAN Signature MZ99 has a carefully calibrated EQ curve to compliment the Meze 99 Classics. It adjusts the treble for more ‘vivaciousness’ and enhances the mid-low bass to extract the last drop of sonic goodness from these already musical headphones.

Its custom ActivEQ setting combines active and passive components to create this special EQ curve. Take a look at the Meze Curve & Compatibility chart here.

The ZEN CAN Signature MZ99 also works with the Meze 99 Neo and the Meze 99 by Drop. ActivEQ can be switched off to make the most of ALL headphones and in-ear monitors.

The ZEN CAN Signature MZ99 also uses XSpace. This is an analogue processing mode which compensates for the ‘in-head localisation’ effect that can occur when listening totracks mixed using a pair of speakers on headphones.

It features PowerMatch – four gain in six dB steps – 0dB, 6dB, 12dB and 18db.

The ZEN CAN Signature MZ99 boasts symmetrical, dual-mono balanced circuitry. It delivers 1600mW (7.2V) into 32 ohms from the single-ended output, with 15V+ available to loads of 600 ohms or more through the balanced output.

It houses stereo RCA and 3.5mm single-ended inputs, plus a balanced 4.4mm Balanced input. It has a 6.3mm output for headphones that have a standard single-ended connector and a 4.4mm Balanced balanced output for headphones offering a balanced connection.

Wi-Fi audio transport

ZEN Stream is a true ground-up design by iFi — the hardware and software implementation is quite exceptional:

Two SuperSpeed USB3.0 ports with Active Noise Cancellation II
S/PDIF out with the iPurifier built-in
iFi software developed with Volumio open-source as the starting point, then coded and optimised by us to achieve the purest streaming software bar none
These are some of the factors behind why the ZEN Stream is at the cutting-edge handling PCM384/DSD256 on LAN and WiFi (802.11n, with 100Mbps on 5Ghz).

Only DAC you’ll need (Bluetooth + USB + S/PDIF)

The ZEN One Signature is the first ZEN DAC to support all hi-res: DSD256, PCM384, MQA384kHz, Bluetooth 96KHz.

96kHz Hi-Res Bluetooth: LDACTM, HWA/LHDC, aptX Adaptive/HD/LL, AAC
USB audio using 16 Core 2000MIPS XMOS low latency microcontroller (MQA decoder)
Fully balanced 4.4mm output
Purity of design, no headphone amp, no volume control. The ultimate DAC for all your home audio sources.

*LDAC and LDAC logo are trademarks of Sony Corporation.

For IEMs and headphones with audiophile-grade components for superior sound.

The ZEN CAN Signature offers a range of input options, including stereo RCA, 3.5mm single-ended, and 4.4mm balanced inputs, making it versatile enough to connect with your laptops, phones, or DACs.

For output, it provides a 4.4mm balanced option for headphones that support balanced connections. It also features a 6.3mm jack for headphones with standard single-ended connectors. If you’re using earphones with a 3.5mm plug, a 3.5mm to 6.3mm adapter is available, so there’s no need to worry.

The unit also includes an analogue balanced output on the back panel, ideal for connecting active speakers via a 4.4mm to XLR adapter. As the ZEN CAN Signature is fully balanced and dual-mono circuit design, this is the recommended output option.

Our super-affordable compact DAC/headphone amp just got even better.

A new and improved low jitter, crystal clock means >20dB better performance. The super-low noise performance means the ZEN DAC V2 will remain quiet even in noisy situations such as yachts or RVs.

The balanced design for the analogue stage – rare and not found at this price point – makes it pretty special and delivers the best sound quality, normally found in higher pricedmodels.

The ZEN DAC V2 sports Balanced 4.4mm outputs at both the front and back. On the front, there’s also the popular 6.3mm headphone socket.

Fully-balanced. Maximum 1,600mW. Battleship headphone amplifier.

The ZEN CAN has trickle-down Class A discrete balanced circuitry from iFi audio’s US$1,699 flagship Pro iCAN. With 15.1v @300 Ohms on tap, it has serious power that will make even difficult-to-drive headphones thump to the beat.

Class A discrete output buffer from the flagship Pro iCAN using Op-Amp (OV2637A)
FET input avoids loading volume control – low distortion/noise
SE inputs (1M Ohm) ensures loading of the source so always in Class A operation
Output amplifier gain of four steps in +6dB perfect for headphone matching

ＮＯ　ＳＴＯＣＫ　at the moment !!!

Our ultra-affordable hi-res Bluetooth® DAC just got even better!

Have utter confidence in the sound quality of the ZEN Blue V2.

It uses Bluetooth5.0®, the very latest version, and the newest Qualcomm 5100 chip to process all incoming Bluetooth® data. The ESS Sabre DAC chip is there to ensure an extremely smooth digital to analogue conversion.

Banish standard ‘Bluetooth Blues’ with the ZEN Blue V2.

The ZEN Air Blue supports any current Bluetooth stereo audio codec (signal) available on the market today.

AAC – better than SBC, widely used, found in Apple devices
aptX HD, aptxLL and aptX Adaptive – variations on an improved aptX
aptX – better than SBC, widely used, found in Android devices
LDACTM – extremely high quality, designed by Sony
LHDC – extremely high quality, designed by Huawei
SBC – standard Bluetooth used by most audio devices
Whatever device you are are using for streaming music via Bluetooth, we’ve got you covered.

*LDAC and LDAC logo are trademarks of Sony Corporation.

The ZEN Air DAC supports different file formats – PCM 32bit/384kHz, fully native DSD256 and MQA.

PCM – Pulse Code Modulation is the file format used in CD, DVD, Blu-ray and other digital audio applications. It’s the next step up from MP3.

DSD – Direct Stream Digital is a very high-quality audio format, better than CD quality. The higher the number (sample rate), the better the recording – DSD64, 128, 256, 512 and 1024. Fully native means that it hasn’t been altered in any way from the original recording.

MQA – Master Quality Authenticated is an award-winning audio technology that enables music fans to stream the original master recording into their home, car or their mobile. With the ZEN Air DAC you can listen to MQA straight out of the box. Simply connect to Tidal Masters and check the option to stream MQA.

Enjoy a louder, clearer listening experience from your PC, Mac, Streamer or TV.

The ZEN Air CAN has two different headphone sockets – 6.3mm single-ended and 4.4mm S-Balanced.

There are basically two types of headphone – single-ended and balanced. In a nutshell, single-ended is the most common but the balanced option is often considered the better as it offers more power and control of the headphones.

At iFi, we know not everyone has balanced headphones, so we’ve created our S-Balanced technology. This gives you all the benefits of a balanced connection – lower noise, less crosstalk – but without the need for balanced headphones.

Our super affordable phono stage makes your vinyl sound purer than ever.

There are two kinds of turntable cartridge – Moving Magnet and Moving Coil – and the ZEN Air Phono works with both of them.

The MM setting is for cartridges with an output voltage of 2mV and higher.

The MC setting for outputs less than 2mV.
You use the gain switch on the rear to change this setting.

It also has a precise RIAA equalisation setting to satisfy the most demanding vinyl lover.